[ RFC3929 | RFC Index | Protocol Standards | Linux Docs | FreeBSD Docs | RFC3931 ]
RFC 3930
Network Working Group D. Eastlake 3rd
Request for Comments: 3930 Motorola Laboratories
Category: Informational October 2004
The Protocol versus Document Points of View in Computer Protocols
Status of this Memo
This memo provides information for the Internet community. It does
not specify an Internet standard of any kind. Distribution of this
memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2004).
Abstract
This document contrasts two points of view: the "document" point of
view, where digital objects of interest are like pieces of paper
written and viewed by people, and the "protocol" point of view where
objects of interest are composite dynamic network messages. Although
each point of view has a place, adherence to a document point of view
can be damaging to protocol design. By understanding both points of
view, conflicts between them may be clarified and reduced.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Points of View . . . . . . . . . . . . . . . . . . . . . . . . 2
2.1. The Basic Points of View . . . . . . . . . . . . . . . . 3
2.2. Questions of Meaning . . . . . . . . . . . . . . . . . . 3
2.2.1. Core Meaning . . . . . . . . . . . . . . . . . . 3
2.2.2. Adjunct Meaning. . . . . . . . . . . . . . . . . 4
2.3. Processing Models. . . . . . . . . . . . . . . . . . . . 5
2.3.1. Amount of Processing . . . . . . . . . . . . . . 5
2.3.2. Granularity of Processing. . . . . . . . . . . . 5
2.3.3. Extensibility of Processing. . . . . . . . . . . 6
2.4. Security and Canonicalization. . . . . . . . . . . . . . 6
2.4.1. Canonicalization . . . . . . . . . . . . . . . . 6
2.4.2. Digital Authentication . . . . . . . . . . . . . 8
2.4.3. Canonicalization and Digital Authentication. . . 8
2.4.4. Encryption . . . . . . . . . . . . . . . . . . . 9
2.5. Unique Internal Labels . . . . . . . . . . . . . . . . . 10
3. Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4. Resolution of the Points of View . . . . . . . . . . . . . . . 11
Eastlake Informational [Page 1]
RFC 3930 Protocol versus Document Viewpoints October 2004
5. Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6. Security Considerations. . . . . . . . . . . . . . . . . . . . 12
Informative References . . . . . . . . . . . . . . . . . . . . . . 12
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 14
Full Copyright Statement . . . . . . . . . . . . . . . . . . . . . 15
1. Introduction
This document contrasts: the "document" point of view, where digital
objects of interest are thought of as pieces of paper written and
viewed by people, and the "protocol" point of view, where objects of
interest are composite dynamic network messages. Those accustomed to
one point of view frequently have great difficulty appreciating the
other: Even after they understand it, they almost always start by
considering things from their accustomed point of view, assume that
most of the universe of interest is best viewed from their
perspective, and commonly slip back into thinking about things
entirely from that point of view. Although each point of view has a
place, adherence to a document point of view can be damaging to
protocol design. By understanding both points of view, conflicts
between them may be clarified and reduced.
Much of the IETF's traditional work has concerned low level binary
protocol constructs. These are almost always viewed from the
protocol point of view. But as higher level application constructs
and syntaxes are involved in the IETF and other standards processes,
difficulties can arise due to participants who have the document
point of view. These two different points of view defined and
explored in section 2 below.
Section 3 gives some examples. Section 4 tries to synthesize the
views and give general design advice in areas that can reasonably be
viewed either way.
2. Points of View
The following subsections contrast the document and protocol points
of view. Each viewpoint is EXAGGERATED for effect.
The document point of view is indicated in paragraphs headed "DOCUM",
and the protocol point of view is indicated in paragraphs headed
"PROTO".
Eastlake Informational [Page 2]
RFC 3930 Protocol versus Document Viewpoints October 2004
2.1. The Basic Points of View
DOCUM: What is important are complete (digital) documents, analogous
to pieces of paper, viewed by people. A major concern is to be
able to present such documents as directly as possible to a court
or other third party. Because what is presented to the person is
all that is important, anything that can effect this, such as a
"style sheet" [CSS], MUST be considered part of the document.
Sometimes it is forgotten that the "document" originates in a
computer, may travel over, be processed in, and be stored in
computer systems, and is viewed on a computer, and that such
operations may involve transcoding, enveloping, or data
reconstruction.
PROTO: What is important are bits on the wire generated and consumed
by well-defined computer protocol processes. No person ever sees
the full messages as such; it is only viewed as a whole by geeks
when debugging, and even then they only see some translated
visible form. If one actually ever has to demonstrate something
about such a message in a court or to a third party, there isn't
any way to avoid having computer experts interpret it. Sometimes
it is forgotten that pieces of such messages may end up being
included in or influencing data displayed to a person.
2.2. Questions of Meaning
The document and protocol points of view have radically different
concepts of the "meaning" of data. The document oriented tend to
consider "meaning" to a human reader extremely important, but this is
something the protocol oriented rarely think about at all.
This difference in point of view extends beyond the core meaning to
the meaning of addenda to data. Both core and addenda meaning are
discussed below.
2.2.1. Core Meaning
DOCUM: The "meaning" of a document is a deep and interesting human
question related to volition. It is probably necessary for the
document to include or reference human language policy and/or
warranty/disclaimer information. At an absolute minimum, some
sort of semantic labelling is required. The assumed situation is
always a person interpreting the whole "document" without other
context. Thus it is reasonable to consult attorneys during
message design, to require that human-readable statements be
"within the four corners" of the document, etc.
Eastlake Informational [Page 3]
RFC 3930 Protocol versus Document Viewpoints October 2004
PROTO: The "meaning" of a protocol message should be clear and
unambiguous from the protocol specification. It is frequently
defined in terms of the state machines of the sender and recipient
processes and may have only the most remote connection with human
volition. Such processes have additional context, and the message
is usually only meaningful with that additional context. Adding
any human-readable text that is not functionally required is
silly. Consulting attorneys during design is a bad idea that
complicates the protocol and could tie a design effort in knots.
2.2.2. Adjunct Meaning
Adjunct items can be added or are logical addenda to a message.
DOCUM: From a document point of view, at the top level is a person
looking at a document. So adjunct items such as digital
signatures, person's names, dates, etc., must be carefully labeled
as to meaning. Thus a digital signature needs to include, in more
or less human-readable form, what that signature means (is the
signer a witness, author, guarantor, authorizer, or what?).
Similarly, a person's name needs to be accompanied by that
person's role, such as editor, author, subject, or contributor.
As another example, a date needs to be accompanied by the
significance of the date, such as date of creation, modification,
distribution, or some other event.
Given the unrestrained scope of what can be documented, there
is a risk of trying to enumerate and standardize all possible
"semantic tags" for each kind of adjunct data during in the design
process. This can be a difficult, complex, and essentially
infinite task (i.e., a rat hole).
PROTO: From a protocol point of view, the semantics of the message
and every adjunct in it are defined in the protocol specification.
Thus, if there is a slot for a digital signature, person's name, a
date, or whatever, the party who is to enter that data, the party
or parties who are to read it, and its meaning are all pre-
defined. Even if there are several possible meanings, the
specific meaning that applies can be specified by a separate
enumerated type field. There is no reason for such a field to be
directly human readable. Only the "meanings" directly relevant to
the particular protocol need be considered. Another way to look
at this is that the "meaning" of each adjunct, instead of being
pushed into and coupled with the adjunct itself, as the document
point of view encourages, is commonly promoted to the level of the
protocol specification, resulting in simpler adjuncts.
Eastlake Informational [Page 4]
RFC 3930 Protocol versus Document Viewpoints October 2004
2.3. Processing Models
The document oriented and protocol oriented have very different views
on what is likely to happen to an object.
2.3.1. Amount of Processing
DOCUM: The model is of a quasi-static object like a piece of paper.
About all one does to pieces of paper is transfer them as a whole,
from one storage area to another, or add signatures, date stamps,
or similar adjuncts. (Possibly one might want an extract from a
document or to combine multiple documents into a summary, but this
isn't the common case.)
PROTO: The standard model of a protocol message is as an ephemeral
composite, multi-level object created by a source process and
consumed by a destination process. Such a message is constructed
from information contained in previously received messages,
locally stored information, local calculations, etc. Quite
complex processing is normal.
2.3.2. Granularity of Processing
DOCUM: The document view is generally of uniform processing or
evaluation of the object being specified. There may be an
allowance for attachments or addenda, but, if so, they would
probably be simple, one level, self documenting attachments or
addenda. (Separate processing of an attachment or addenda is
possible but not usual.)
PROTO: Processing is complex and almost always affects different
pieces of the message differently. Some pieces may be intended
for use only by the destination process and may be extensively
processed there. Others may be present so that the destination
process can, at some point, do minimal processing and forward them
in other messages to yet more processes. The object's structure
can be quite rich and have multilevel or recursive aspects.
Because messages are processed in a local context, elements of the
message may include items like a signature that covers multiple
data elements, some of which are in the message, some received in
previous messages, and some locally calculated.
Eastlake Informational [Page 5]
RFC 3930 Protocol versus Document Viewpoints October 2004
2.3.3. Extensibility of Processing
DOCUM: The document oriented don't usually think of extensibility as
a major problem. They assume that their design, perhaps with some
simple version scheme, will meet all requirements. Or, coming
from an SGML/DTD world of closed systems, they may assume that
knowledge of new versions or extensions can be easily and
synchronously distributed to all participating sites.
PROTO: Those who are protocol oriented assume that protocols will
always need to be extended and that it will not be possible to
update all implementations as such extensions are deployed and/or
retired. This is a difficult problem but those from the protocol
point of view try to provide the tools needed. For example, they
specify carefully defined versioning and extension/feature
labelling, including the ability to negotiate versions and
features where possible and at least a specification of how
parties running different levels should interact, providing
length/delimiting information for all data so that it can be
skipped if not understood, and providing destination labelling so
that a process can tell that it should ignore data except for
passing it through to a later player.
2.4. Security and Canonicalization
Security is a subtle area. Sometime problems can be solved in a way
that is effective across many applications. Those solutions are
typically incorporated into standard security syntaxes such as those
for ASN.1 [RFC3852] and XML [RFC3275, XMLENC]. But there are almost
always application specific questions, particularly the question of
exactly what information needs to be authenticated or encrypted.
Questions of exactly what needs to be secured and how to do so
robustly are deeply entwined with canonicalization. They are also
somewhat different for authentication and encryption, as discussed
below.
2.4.1. Canonicalization
Canonicalization is the transformation of the "significant"
information in a message into a "standard" form, discarding
"insignificant" information, for example, encoding into a standard
character set or changing line endings into a standard encoding and
discarding the information about the original character set or line
ending encodings. Obviously, what is "significant" and what is
"insignificant" varies with the application or protocol and can be
tricky to determine. However, it is common that for each particular
syntax, such as ASCII [ASCII], ASN.1 [ASN.1], or XML [XML], a
Eastlake Informational [Page 6]
RFC 3930 Protocol versus Document Viewpoints October 2004
standard canonicalization (or canonicalizations) is specified or
developed through practice. This leads to the design of applications
that assume one of such standard canonicalizations, thus reducing the
need for per-application canonicalization. (See also [RFC3076,
RFC3741].)
DOCUM: From the document point of view, canonicalization is suspect
if not outright evil. After all, if you have a piece of paper
with writing on it, any modification to "standardize" its format
can be an unauthorized change in the original message as created
by the "author", who is always visualized as a person. Digital
signatures are like authenticating signatures or seals or time
stamps on the bottom of the "piece of paper". They do not justify
and should not depend on changes in the message appearing above
them. Similarly, encryption is just putting the "piece of paper"
in a vault that only certain people can open and does not justify
any standardization or canonicalization of the message.
PROTO: From the protocol point of view, canonicalization is simply a
necessity. It is just a question of exactly what canonicalization
or canonicalizations to apply to a pattern of bits that are
calculated, processed, stored, communicated, and finally parsed
and acted on. Most of these bits have never been seen and never
will be seen by a person. In fact, many of the parts of the
message will be artifacts of encoding, protocol structure, and
computer representation rather than anything intended for a person
to see.
Perhaps in theory, the "original", idiosyncratic form of any
digitally signed part could be conveyed unchanged through the
computer process, storage, and communications channels that
implement the protocol and could be usefully signed in that form.
But in practical systems of any complexity, this is unreasonably
difficult, at least for most parts of messages. And if it were
possible, it would be virtually useless, because to authenticate
messages you would still have to determine their equivalence with
the preserved original form.
Thus, signed data must be canonicalized as part of signing and
verification to compensate for insignificant changes made in
processing, storage, and communication. Even if, miraculously, an
initial system design avoids all cases of signed message
reconstruction based on processed data or re-encoding based on
character set or line ending or capitalization or numeric
representation or time zones or whatever, later protocol revisions
and extensions are certain to require such reconstruction and/or
re-encoding eventually. If such "insignificant" changes are not
ameliorated by canonicalization, signatures won't work, as
discussed in more detail in 2.4.3 below.
Eastlake Informational [Page 7]
RFC 3930 Protocol versus Document Viewpoints October 2004
2.4.2. Digital Authentication
DOCUM: The document-oriented view on authentication tends to be a
"digital signature" and "forms" point of view. (The "forms" point
of view is a subset of the document point of view that believes
that a principal activity is presenting forms to human beings so
that they can fill out and sign portions of those forms [XForms]).
Since the worry is always about human third parties and viewing
the document in isolation, those who are document oriented always
want "digital signature" (asymmetric key) authentication, with its
characteristics of "non-repudiability", etc. As a result, they
reject secret key based message authentication codes, which
provide the verifier with the capability of forging an
authentication code, as useless. (See any standard reference on
the subject for the usual meaning of these terms.)
From their point of view, you have a piece of paper or form
which a person signs. Sometimes a signature covers only part of a
form, but that's usually because a signature can only cover data
that is already there. And normally at least one signature covers
the "whole" document/form. Thus the document oriented want to be
able to insert digital signatures into documents without changing
the document type and even "inside" the data being signed, which
requires a mechanism to skip the signature so that it does not try
to sign itself.
PROTO: From a protocol point of view, the right kind of
authentication to use, whether "digital signature" or symmetric
keyed authentication code (or biometric or whatever), is just
another engineering decision affected by questions of efficiency,
desired security model, etc. Furthermore, the concept of signing
a "whole" message seems very peculiar (unless it is a copy being
saved for archival purposes, in which case you might be signing a
whole archive at once anyway). Typical messages are made up of
various pieces with various destinations, sources, and security
requirements. Furthermore, there are common fields that it is
rarely useful to sign because they change as the message is
communicated and processed. Examples include hop counts, routing
history, and local forwarding tags.
2.4.3. Canonicalization and Digital Authentication
For authenticating protocol system messages of practical complexity,
you are faced with the choice of doing
(1) "too little canonicalization" and having brittle authentication,
useless due to verification failures caused by surface
representation changes without significance,
Eastlake Informational [Page 8]
RFC 3930 Protocol versus Document Viewpoints October 2004
(2) the sometimes difficult and tricky work of selecting or designing
an appropriate canonicalization or canonicalizations to be used
as part of authentication generation and verification, producing
robust and useful authentication, or
(3) "too much canonicalization" and having insecure authentication,
useless because it still verifies even when significant changes
are made in the signed data.
The only useful option above is number 2.
2.4.4. Encryption
In terms of processing, transmission, and storage, encryption turns
out to be much easier to get working than signatures. Why? Because
the output of encryption is essentially random bits. It is clear
from the beginning that those bits need to be transferred to the
destination in some absolutely clean way that does not change even
one bit. Because the encrypted bits are meaningless to a human
being, there is no temptation among the document oriented to try to
make them more "readable". So appropriate techniques of encoding at
the source, such as Base64 [RFC2045], and decoding at the
destination, are always incorporated to protect or "armor" the
encrypted data.
Although the application of canonicalization is more obvious with
digital signatures, it may also apply to encryption, particularly
encryption of parts of a message. Sometimes elements of the
environment where the plain text data is found may affect its
interpretation. For example, interpretation can be affected by the
character encoding or bindings of dummy symbols. When the data is
decrypted, it may be into an environment with a different character
encoding or dummy symbol bindings. With a plain text message part,
it is usually clear which of these environmental elements need to be
incorporated in or conveyed with the message. But an encrypted
message part is opaque. Thus some canonical representation that
incorporates such environmental factors may be needed.
DOCUM: Encryption of the entire document is usually what is
considered. Because signatures are always thought of as human
assent, people with a document point of view tend to vehemently
assert that encrypted data should never be signed unless the plain
text of it is known.
PROTO: Messages are complex composite multi-level structures, some
pieces of which are forwarded multiple hops. Thus the design
question is what fields should be encrypted by what techniques to
what destination or destinations and with what canonicalization.
Eastlake Informational [Page 9]
RFC 3930 Protocol versus Document Viewpoints October 2004
It sometimes makes perfect sense to sign encrypted data you don't
understand; for example, the signature could just be for integrity
protection or for use as a time stamp, as specified in the
protocol.
2.5. Unique Internal Labels
It is desirable to be able to reference parts of structured messages
or objects by some sort of "label" or "id" or "tag". The idea is
that this forms a fixed "anchor" that can be used "globally", at
least within an application domain, to reference the tagged part.
DOCUM: From the document point of view, it seems logical just to
provide for a text tag. Users or applications could easily come
up with short readable tags. These would probably be meaningful
to a person if humanly generated (e.g., "Susan") and at least
fairly short and systematic if automatically generated (e.g.,
"A123"). The ID attribute type in XML [XML] appears to have been
thought of this way, although it can be used in other ways.
PROTO: From a protocol point of view, unique internal labels look
very different than they do from a document point of view. Since
this point of view assumes that pieces of different protocol
messages will later be combined in a variety of ways, previously
unique labels can conflict. There are really only three
possibilities if such tags are needed, as follows:
(1) Have a system for dynamically rewriting such tags to maintain
uniqueness. This is usually a disaster, as it (a) invalidates
any stored copies of the tags that are not rewritten, and it
is usually impossible to be sure there aren't more copies
lurking somewhere you failed to update, and (b) invalidates
digital signatures that cover a changed tag.
(2) Use some form of hierarchical qualified tags. Thus the total
tag can remain unique even if a part is moved, because its
qualification changes. This avoids the digital signature
problems described above. But it destroys the concept of a
globally-unique anchor embedded in and moving with the data.
And stored tags may still be invalidated by data moves.
Nevertheless, within the scope of a particular carefully
designed protocol, such as IOTP [RFC2801], this can work.
(3) Construct a lengthy globally-unique tag string. This can be
done successfully by using a good enough random number
generator and big enough random tags (perhaps about 24
characters) sequentially, as in the way email messages IDs are
created [RFC2822].
Eastlake Informational [Page 10]
RFC 3930 Protocol versus Document Viewpoints October 2004
Thus, from a protocol point of view, such tags are difficult but
if they are needed, choice 3 works best.
3. Examples
IETF protocols are replete with examples of the protocol viewpoint
such as TCP [RFC793], IPSEC [RFC2411], SMTP [RFC2821], and IOTP
[RFC2801, RFC2802].
The eXtensible Markup Language [XML] is an example of something that
can easily be viewed both ways and where the best results frequently
require attention to both the document and the protocol points of
view.
Computerized court documents, human-to-human email, and the X.509v3
Certificate [X509v3], particularly the X509v3 policy portion, are
examples primarily designed from the document point of view.
4. Resolution of the Points of View
There is some merit to each point of view. Certainly the document
point of view has some intuitive simplicity and appeal and is OK for
applications where it meets needs.
The protocol point of view can come close to encompassing the
document point of view as a limiting case. In particular, it does so
under the following circumstances:
1. As the complexity of messages declines to a single payload
(perhaps with a few attachments).
2. As the mutability of the payload declines to some standard format
that needs little or no canonicalization.
3. As the number of parties and amount of processing declines as
messages are transferred.
4. As the portion of the message intended for more or less direct
human consumption increases.
Under the above circumstances, the protocol point of view would be
narrowed to something quite close to the document point of view.
Even when the document point of view is questionable, the addition of
a few options to a protocol will usually mollify the perceived needs
of those looking at things from that point of view. For example,
adding optional non-canonicalization or an optional policy statement,
or inclusion of semantic labels, or the like.
Eastlake Informational [Page 11]
RFC 3930 Protocol versus Document Viewpoints October 2004
On the other hand, the document point of view is hard to stretch to
encompass the protocol case. From a strict piece of paper
perspective, canonicalization is wrong; inclusion of human language
policy text within every significant object and a semantic tag with
every adjunct should be mandatory; and so on. Objects designed in
this way are rarely suitable for protocol use, as they tend to be
improperly structured to accommodate hierarchy and complexity,
inefficient (due to unnecessary text and self-documenting
inclusions), and insecure (due to brittle signatures).
Thus, to produce usable protocols, it is best to start with the
protocol point of view and add document point of view items as
necessary to achieve consensus.
5. Conclusion
I hope that this document will help explain to those of either point
of view where those with the other view are coming from. It is my
hope that this will decrease conflict, shed some light -- in
particular on the difficulties of security design -- and lead to
better protocol designs.
6. Security Considerations
This document considers the security implications of the Document and
Protocol points of view, as defined in Sections 2.1 and 2.2, and
warns of the security defects in the Document view. Most of these
security considerations appear in Section 2.4 but they are also
touched on elsewhere in Section 2 which should be read in its
entirety.
Informative References
[ASCII] "USA Standard Code for Information Interchange", X3.4,
American National Standards Institute: New York, 1968.
[ASN.1] ITU-T Recommendation X.680 (1997) | ISO/IEC 8824-1:1998,
"Information Technology - Abstract Syntax Notation One
(ASN.1): Specification of Basic Notation".
ITU-T Recommendation X.690 (1997) | ISO/IEC 8825-1:1998,
"Information Technology - ASN.1 Encoding Rules:
Specification of Basic Encoding Rules (BER), Canonical
Encoding Rules (CER) and Distinguished Encoding Rules
(DER)". <http://www.itu.int/ITU-
T/studygroups/com17/languages/index.html>.
Eastlake Informational [Page 12]
RFC 3930 Protocol versus Document Viewpoints October 2004
[CSS] "Cascading Style Sheets, level 2 revision 1 CSS 2.1
Specification", B. Bos, T. Gelik, I. Hickson, H. Lie,
W3C Candidate Recommendation, 25 February 2004.
<http://www.w3.org/TR/CSS21>;
[RFC793] Postel, J., "Transmission Control Protocol", STD 7, RFC
793, September 1981.
[RFC2045] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
Extensions (MIME) Part One: Format of Internet Message
Bodies", RFC 2045, November 1996.
[RFC2411] Thayer, R., Doraswamy, N., and R. Glenn, "IP Security
Document Roadmap", RFC 2411, November 1998.
[RFC3852] Housley, R., "Cryptographic Message Syntax (CMS)", RFC
3852, July 2004.
[RFC2801] Burdett, D., "Internet Open Trading Protocol - IOTP
Version 1.0", RFC 2801, April 2000.
[RFC2802] Davidson, K. and Y. Kawatsura, "Digital Signatures for
the v1.0 Internet Open Trading Protocol (IOTP)", RFC
2802, April 2000.
[RFC2821] Klensin, J., "Simple Mail Transfer Protocol", RFC 2821,
April 2001.
[RFC2822] Resnick, P., "Internet Message Format", RFC 2822, April
2001.
[RFC3076] Boyer, J., "Canonical XML Version 1.0", RFC 3076, March
2001.
[RFC3275] Eastlake 3rd, D., Reagle, J., and D. Solo, "(Extensible
Markup Language) XML-Signature Syntax and Processing",
RFC 3275, March 2002.
[RFC3741] Berger, L., "Generalized Multi-Protocol Label Switching
(GMPLS) Signaling Functional Description", RFC 3471,
January 2003.
[X509v3] "ITU-T Recommendation X.509 version 3 (1997),
Information Technology - Open Systems Interconnection -
The Directory Authentication Framework", ISO/IEC 9594-
8:1997.
Eastlake Informational [Page 13]
RFC 3930 Protocol versus Document Viewpoints October 2004
[XForms] "XForms 1.0", M. Dubinko, L. Klotz, R. Merrick, T.
Raman, W3C Recommendation 14 October 2003.
<http://www.w3.org/TR/xforms/>;
[XML] "Extensible Markup Language (XML) 1.0 Recommendation
(2nd Edition)". T. Bray, J. Paoli, C. M. Sperberg-
McQueen, E. Maler, October 2000.
<http://www.w3.org/TR/2000/REC-xml-20001006>;
[XMLENC] "XML Encryption Syntax and Processing", J. Reagle, D.
Eastlake, December 2002.
<http://www.w3.org/TR/2001/RED-xmlenc-core-20021210/>;
Author's Address
Donald E. Eastlake 3rd
Motorola Laboratories
155 Beaver Street
Milford, MA 01757 USA
Phone: +1 508-786-7554 (w)
+1 508-634-2066 (h)
Fax: +1 508-786-7501 (w)
EMail: Donald.Eastlake@motorola.com
Eastlake Informational [Page 14]
RFC 3930 Protocol versus Document Viewpoints October 2004
Full Copyright Statement
Copyright (C) The Internet Society (2004).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and at www.rfc-editor.org, and except as set
forth therein, the authors retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the ISOC's procedures with respect to rights in ISOC Documents can
be found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at ietf-
ipr@ietf.org.
Acknowledgement
Funding for the RFC Editor function is currently provided by the
Internet Society.
Eastlake Informational [Page 15]
Hosting by: Hurra Communications Ltd.
Generated: 2007-01-26 17:59:50
