Google      
  WWW DocMirror.net

[ RFC3328 | RFC Index | Protocol Standards | Linux Docs | FreeBSD Docs | RFC3330 ]

RFC 3329








Network Working Group                                           J. Arkko
Request for Comments: 3329                                   V. Torvinen
Category: Standards Track                                   G. Camarillo
                                                                Ericsson
                                                                A. Niemi
                                                               T. Haukka
                                                                   Nokia
                                                            January 2003


                 Security Mechanism Agreement for the
                   Session Initiation Protocol (SIP)

Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2003).  All Rights Reserved.

Abstract

   This document defines new functionality for negotiating the security
   mechanisms used between a Session Initiation Protocol (SIP) user
   agent and its next-hop SIP entity.  This new functionality
   supplements the existing methods of choosing security mechanisms
   between SIP entities.

Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
      1.1   Motivations . . . . . . . . . . . . . . . . . . . . . . 2
      1.2  Design Goals . . . . . . . . . . . . . . . . . . . . . . 3
      1.3  Conventions  . . . . . . . . . . . . . . . . . . . . . . 3
   2.  Solution . . . . . . . . . . . . . . . . . . . . . . . . . . 3
      2.1   Overview of Operation . . . . . . . . . . . . . . . . . 3
      2.2  Syntax . . . . . . . . . . . . . . . . . . . . . . . . . 4
      2.3  Protocol Operation . . . . . . . . . . . . . . . . . . . 6
         2.3.1 Client Initiated . . . . . . . . . . . . . . . . . . 6
         2.3.2 Server Initiated . . . . . . . . . . . . . . . . . . 8
      2.4  Security Mechanism Initiation. . . . . . . . . . . . . . 9
      2.5  Duration of Security Associations. . . . . . . . . . . .10
      2.6  Summary of Header Field Use. . . . . . . . . . . . . . .10



Arkko, et. al.              Standards Track                     [Page 1]


RFC 3329                 SIP Security Agreement             January 2003


   3.  Backwards Compatibility  . . . . . . . . . . . . . . . . . .11
   4.  Examples . . . . . . . . . . . . . . . . . . . . . . . . . .12
      4.1  Client Initiated . . . . . . . . . . . . . . . . . . . .12
      4.2  Server Initiated . . . . . . . . . . . . . . . . . . . .14
   5.  Security Considerations  . . . . . . . . . . . . . . . . . .15
   6.  IANA Considerations. . . . . . . . . . . . . . . . . . . . .17
      6.1  Registration Information . . . . . . . . . . . . . . . .17
      6.2  Registration Template. . . . . . . . . . . . . . . . . .18
      6.3  Header Field Names . . . . . . . . . . . . . . . . . . .18
      6.4  Response Codes . . . . . . . . . . . . . . . . . . . . .18
      6.5  Option Tags. . . . . . . . . . . . . . . . . . . . . . .19
   7.  Contributors . . . . . . . . . . . . . . . . . . . . . . . .19
   8.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . .19
   9.  Normative References . . . . . . . . . . . . . . . . . . . .19
   10. Informative References .  . . . . . . . . . . . . . . . . . 20
   A.  Syntax of ipsec-3gpp . . . . . . . . . . . . . . . . . . . .21
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . .23
   Full Copyright Statement . . . . . . . . . . . . . . . . . . . .24

1. Introduction

   Traditionally, security protocols have included facilities to agree
   on the used mechanisms, algorithms, and other security parameters.
   This is to add flexibility, since different mechanisms are usually
   suitable to different scenarios.  Also, the evolution of security
   mechanisms often introduces new algorithms, or uncovers problems in
   existing ones, making negotiation of mechanisms a necessity.

   The purpose of this specification is to define negotiation
   functionality for the Session Initiation Protocol (SIP) [1].  This
   negotiation is intended to work only between a UA and its first-hop
   SIP entity.

1.1 Motivations

   Without a secured method to choose between security mechanisms and/or
   their parameters, SIP is vulnerable to certain attacks.
   Authentication and integrity protection using multiple alternative
   methods and algorithms is vulnerable to Man-in-the-Middle (MitM)
   attacks (e.g., see [4]).

   It is also hard or sometimes even impossible to know whether a
   specific security mechanism is truly unavailable to a SIP peer
   entity, or if in fact a MitM attack is in action.

   In certain small networks these issues are not very relevant, as the
   administrators of such networks can deploy appropriate software
   versions and set up policies for using exactly the right type of



Arkko, et. al.              Standards Track                     [Page 2]


RFC 3329                 SIP Security Agreement             January 2003


   security.  However, SIP is also expected to be deployed to hundreds
   of millions of small devices with little or no possibilities for
   coordinated security policies, let alone software upgrades, which
   necessitates the need for the negotiation functionality to be
   available from the very beginning of deployment (e.g., see [11]).

1.2 Design Goals

   1. The entities involved in the security agreement process need to
      find out exactly which security mechanisms to apply, preferably
      without excessive additional roundtrips.

   2. The selection of security mechanisms itself needs to be secure.
      Traditionally, all security protocols use a secure form of
      negotiation.  For instance, after establishing mutual keys through
      Diffie-Hellman, IKE sends hashes of the previously sent data
      including the offered crypto mechanisms [8].  This allows the
      peers to detect if the initial, unprotected offers were tampered
      with.

   3. The entities involved in the security agreement process need to be
      able to indicate success or failure of the security agreement
      process.

   4. The security agreement process should not introduce any additional
      state to be maintained by the involved entities.

1.3 Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in BCP 14, RFC 2119 [9].

2. Solution

2.1 Overview of Operation

   The message flow below illustrates how the mechanism defined in this
   document works:

             1. Client ----------client list---------> Server
             2. Client <---------server list---------- Server
             3. Client ------(turn on security)------- Server
             4. Client ----------server list---------> Server
             5. Client <---------ok or error---------- Server

                Figure 1: Security agreement message flow.




Arkko, et. al.              Standards Track                     [Page 3]


RFC 3329                 SIP Security Agreement             January 2003


   Step 1:  Clients wishing to use this specification can send a list of
      their supported security mechanisms along the first request to the
      server.

   Step 2:  Servers wishing to use this specification can challenge the
      client to perform the security agreement procedure.  The security
      mechanisms and parameters supported by the server are sent along
      in this challenge.

   Step 3:  The client then proceeds to select the highest-preference
      security mechanism they have in common and to turn on the selected
      security.

   Step 4:  The client contacts the server again, now using the selected
      security mechanism.  The server's list of supported security
      mechanisms is returned as a response to the challenge.

   Step 5:  The server verifies its own list of security mechanisms in
      order to ensure that the original list had not been modified.

   This procedure is stateless for servers (unless the used security
   mechanisms require the server to keep some state).

   The client and the server lists are both static (i.e., they do not
   and cannot change based on the input from the other side).  Nodes
   may, however, maintain several static lists, one for each interface,
   for example.

   Between Steps 1 and 2, the server may set up a non-self-describing
   security mechanism if necessary.  Note that with this type of
   security mechanisms, the server is necessarily stateful.  The client
   would set up the non-self-describing security mechanism between Steps
   2 and 4.

2.2 Syntax

   We define three new SIP header fields, namely Security-Client,
   Security-Server and Security-Verify.  The notation used in the
   Augmented BNF definitions for the syntax elements in this section is
   as used in SIP [1], and any elements not defined in this section are
   as defined in SIP and the documents to which it refers:

      security-client  = "Security-Client" HCOLON
                         sec-mechanism *(COMMA sec-mechanism)
      security-server  = "Security-Server" HCOLON
                         sec-mechanism *(COMMA sec-mechanism)
      security-verify  = "Security-Verify" HCOLON
                         sec-mechanism *(COMMA sec-mechanism)



Arkko, et. al.              Standards Track                     [Page 4]


RFC 3329                 SIP Security Agreement             January 2003


      sec-mechanism    = mechanism-name *(SEMI mech-parameters)
      mechanism-name   = ( "digest" / "tls" / "ipsec-ike" /
                          "ipsec-man" / token )
      mech-parameters  = ( preference / digest-algorithm /
                           digest-qop / digest-verify / extension )
      preference       = "q" EQUAL qvalue
      qvalue           = ( "0" [ "." 0*3DIGIT ] )
                          / ( "1" [ "." 0*3("0") ] )
      digest-algorithm = "d-alg" EQUAL token
      digest-qop       = "d-qop" EQUAL token
      digest-verify    = "d-ver" EQUAL LDQUOT 32LHEX RDQUOT
      extension        = generic-param

   Note that qvalue is already defined in the SIP BNF [1].  We have
   copied its definitions here for completeness.

   The parameters described by the BNF above have the following
   semantics:

      Mechanism-name
         This token identifies the security mechanism supported by the
         client, when it appears in a Security-Client header field; or
         by the server, when it appears in a Security-Server or in a
         Security-Verify header field.  The mechanism-name tokens are
         registered with the IANA.  This specification defines four
         values:

         *  "tls" for TLS [3].

         *  "digest" for HTTP Digest [4].

         *  "ipsec-ike" for IPsec with IKE [2].

         *  "ipsec-man" for manually keyed IPsec without IKE.

      Preference
         The "q" value indicates a relative preference for the
         particular mechanism.  The higher the value the more preferred
         the mechanism is.  All the security mechanisms MUST have
         different "q" values.  It is an error to provide two mechanisms
         with the same "q" value.

      Digest-algorithm
         This optional parameter is defined here only for HTTP Digest
         [4] in order to prevent the bidding-down attack for the HTTP
         Digest algorithm parameter.  The content of the field may have
         same values as defined in [4] for the "algorithm" field.




Arkko, et. al.              Standards Track                     [Page 5]


RFC 3329                 SIP Security Agreement             January 2003


      Digest-qop
         This optional parameter is defined here only for HTTP Digest
         [4] in order to prevent the bidding-down attack for the HTTP
         Digest qop parameter.  The content of the field may have same
         values as defined in [4] for the "qop" field.

      Digest-verify
         This optional parameter is defined here only for HTTP Digest
         [4] in order to prevent the bidding-down attack for the SIP
         security mechanism agreement (this document).  The content of
         the field is counted exactly the same way as "request-digest"
         in [4] except that the Security-Server header field is included
         in the A2 parameter.  If the "qop" directive's value is "auth"
         or is unspecified, then A2 is:

            A2 = Method ":" digest-uri-value ":" security-server

            If the "qop" value is "auth-int", then A2 is:

            A2 = Method ":" digest-uri-value ":" H(entity-body) ":"
            security-server

         All linear white spaces in the Security-Server header field
         MUST be replaced by a single SP before calculating or
         interpreting the digest-verify parameter.  Method, digest-uri-
         value, entity-body, and any other HTTP Digest parameter are as
         specified in [4].

   Note that this specification does not introduce any extension or
   change to HTTP Digest [4].  This specification only re-uses the
   existing HTTP Digest mechanisms to protect the negotiation of
   security mechanisms between SIP entities.

2.3 Protocol Operation

   This section deals with the protocol details involved in the
   negotiation between a SIP UA and its next-hop SIP entity.  Throughout
   the text the next-hop SIP entity is referred to as the first-hop
   proxy or outbound proxy.  However, the reader should bear in mind
   that a user agent server can also be the next-hop for a user agent
   client.

2.3.1 Client Initiated

   If a client ends up using TLS to contact the server because it has
   followed the rules specified in [5], the client MUST NOT use the
   security agreement procedure of this specification.  If a client ends




Arkko, et. al.              Standards Track                     [Page 6]


RFC 3329                 SIP Security Agreement             January 2003


   up using non-TLS connections because of the rules in [5], the client
   MAY use the security agreement of this specification to detect DNS
   spoofing, or to negotiate some other security than TLS.

   A client wishing to use the security agreement of this specification
   MUST add a Security-Client header field to a request addressed to its
   first-hop proxy (i.e., the destination of the request is the first-
   hop proxy).  This header field contains a list of all the security
   mechanisms that the client supports.  The client SHOULD NOT add
   preference parameters to this list.  The client MUST add both a
   Require and Proxy-Require header field with the value "sec-agree" to
   its request.

   The contents of the Security-Client header field may be used by the
   server to include any necessary information in its response.

   A server receiving an unprotected request that contains a Require or
   Proxy-Require header field with the value "sec-agree" MUST respond to
   the client with a 494 (Security Agreement Required) response.  The
   server MUST add a Security-Server header field to this response
   listing the security mechanisms that the server supports.  The server
   MUST add its list to the response even if there are no common
   security mechanisms in the client's and server's lists.  The server's
   list MUST NOT depend on the contents of the client's list.

   The server MUST compare the list received in the Security-Client
   header field with the list to be sent in the Security-Server header
   field.  When the client receives this response, it will choose the
   common security mechanism with the highest "q" value.  Therefore, the
   server MUST add the necessary information so that the client can
   initiate that mechanism (e.g., a Proxy-Authenticate header field for
   HTTP Digest).

   When the client receives a response with a Security-Server header
   field, it MUST choose the security mechanism in the server's list
   with the highest "q" value among all the mechanisms that are known to
   the client.  Then, it MUST initiate that particular security
   mechanism as described in Section 3.5.  This initiation may be
   carried out without involving any SIP message exchange (e.g.,
   establishing a TLS connection).

   If an attacker modified the Security-Client header field in the
   request, the server may not include in its response the information
   needed to establish the common security mechanism with the highest
   preference value (e.g., the Proxy-Authenticate header field is
   missing).  A client detecting such a lack of information in the





Arkko, et. al.              Standards Track                     [Page 7]


RFC 3329                 SIP Security Agreement             January 2003


   response MUST consider the current security agreement process
   aborted, and MAY try to start it again by sending a new request with
   a Security-Client header field as described above.

   All the subsequent SIP requests sent by the client to that server
   SHOULD make use of the security mechanism initiated in the previous
   step.  These requests MUST contain a Security-Verify header field
   that mirrors the server's list received previously in the Security-
   Server header field.  These requests MUST also have both a Require
   and Proxy-Require header fields with the value "sec-agree".

   The server MUST check that the security mechanisms listed in the
   Security-Verify header field of incoming requests correspond to its
   static list of supported security mechanisms.

      Note that, following the standard SIP header field comparison
      rules defined in [1], both lists have to contain the same security
      mechanisms in the same order to be considered equivalent.  In
      addition, for each particular security mechanism, its parameters
      in both lists need to have the same values.

   The server can proceed processing a particular request if, and only
   if, the list was not modified.  If modification of the list is
   detected, the server MUST respond to the client with a 494 (Security
   Agreement Required) response.  This response MUST include the
   server's unmodified list of supported security mechanisms.  If the
   list was not modified, and the server is a proxy, it MUST remove the
   "sec-agree" value from both the Require and Proxy-Require header
   fields, and then remove the header fields if no values remain.

   Once the security has been negotiated between two SIP entities, the
   same SIP entities MAY use the same security when communicating with
   each other in different SIP roles.  For example, if a UAC and its
   outbound proxy negotiate some security, they may try to use the same
   security for incoming requests (i.e., the UA will be acting as a
   UAS).

   The user of a UA SHOULD be informed about the results of the security
   mechanism agreement.  The user MAY decline to accept a particular
   security mechanism, and abort further SIP communications with the
   peer.

2.3.2 Server Initiated

   A server decides to use the security agreement described in this
   document based on local policy.  If a server receives a request from
   the network interface that is configured to use this mechanism, it
   must check that the request has only one Via entry.  If there are



Arkko, et. al.              Standards Track                     [Page 8]


RFC 3329                 SIP Security Agreement             January 2003


   several Via entries, the server is not the first-hop SIP entity, and
   it MUST NOT use this mechanism.  For such a request, the server must
   return a 502 (Bad Gateway) response.

   A server that decides to use this agreement mechanism MUST challenge
   unprotected requests with one Via entry regardless of the presence or
   the absence of any Require, Proxy-Require or Supported header fields
   in incoming requests.

   A server that by policy requires the use of this specification and
   receives a request that does not have the sec-agree option tag in a
   Require, Proxy-Require or Supported header field MUST return a 421
   (Extension Required) response.  If the request had the sec-agree
   option tag in a Supported header field, it MUST return a 494
   (Security Agreement Required) response.  In both situation the server
   MUST also include in the response a Security-Server header field
   listing its capabilities and a Require header field with an option-
   tag "sec-agree" in it.  The server MUST also add necessary
   information so that the client can initiate the preferred security
   mechanism (e.g., a Proxy-Authenticate header field for HTTP Digest).

   Clients that support the extension defined in this document SHOULD
   add a Supported header field with a value of "sec-agree".

2.4 Security Mechanism Initiation

   Once the client chooses a security mechanism from the list received
   in the Security-Server header field from the server, it initiates
   that mechanism.  Different mechanisms require different initiation
   procedures.

   If "tls" is chosen, the client uses the procedures of Section 8.1.2
   of [1] to determine the URI to be used as an input to the DNS
   procedures of [5].  However, if the URI is a SIP URI, it MUST treat
   the scheme as if it were sips, not sip.  If the URI scheme is not
   sip, the request MUST be sent using TLS.

   If "digest" is chosen, the 494 (Security Agreement Required) response
   will contain an HTTP Digest authentication challenge.  The client
   MUST use the algorithm and qop parameters in the Security-Server
   header field to replace the same parameters in the HTTP Digest
   challenge.  The client MUST also use the digest-verify parameter in
   the Security-Verify header field to protect the Security-Server
   header field as specified in 2.2.







Arkko, et. al.              Standards Track                     [Page 9]


RFC 3329                 SIP Security Agreement             January 2003


   To use "ipsec-ike", the client attempts to establish an IKE
   connection to the host part of the Request-URI in the first request
   to the server.  If the IKE connection attempt fails, the agreement
   procedure MUST be considered to have failed, and MUST be terminated.

   Note that "ipsec-man" will only work if the communicating SIP
   entities know which keys and other parameters to use.  It is outside
   the scope of this specification to describe how this information can
   be made known to the peers.  All rules for minimum implementations,
   such as mandatory-to-implement algorithms, apply as defined in [2],
   [6], and [7].

   In both IPsec-based mechanisms, it is expected that appropriate
   policy entries for protecting SIP have been configured or will be
   created before attempting to use the security agreement procedure,
   and that SIP communications use port numbers and addresses according
   to these policy entries.  It is outside the scope of this
   specification to describe how this information can be made known to
   the peers, but it would typically be configured at the same time as
   the IKE credentials or manual SAs have been entered.

2.5 Duration of Security Associations

   Once a security mechanism has been negotiated, both the server and
   the client need to know until when it can be used.  All the
   mechanisms described in this document have a different way of
   signaling the end of a security association.  When TLS is used, the
   termination of the connection indicates that a new negotiation is
   needed.  IKE negotiates the duration of a security association.  If
   the credentials provided by a client using digest are no longer
   valid, the server will re-challenge the client.  It is assumed that
   when IPsec-man is used, the same out-of-band mechanism used to
   distribute keys is used to define the duration of the security
   association.

2.6 Summary of Header Field Use

   The header fields defined in this document may be used to negotiate
   the security mechanisms between a UAC and other SIP entities
   including UAS, proxy, and registrar.  Information about the use of
   headers in relation to SIP methods and proxy processing is summarized
   in Table 1.









Arkko, et. al.              Standards Track                    [Page 10]


RFC 3329                 SIP Security Agreement             January 2003


   Header field           where        proxy ACK BYE CAN INV OPT REG
   _________________________________________________________________
   Security-Client          R           ard   -   o   -   o   o   o
   Security-Server       421,494              -   o   -   o   o   o
   Security-Verify          R           ard   -   o   -   o   o   o


   Header field           where        proxy SUB NOT PRK IFO UPD MSG
   _________________________________________________________________
   Security-Client          R           ard   o   o   -   o   o   o
   Security-Server       421,494              o   o   -   o   o   o
   Security-Verify          R           ard   o   o   -   o   o   o

                     Table 1: Summary of Header Usage.

   The "where" column describes the request and response types in which
   the header field may be used.  The header may not appear in other
   types of SIP messages.  Values in the where column are:

   *  R: Header field may appear in requests.

   *  421, 494: A numerical value indicates response codes with which
      the header field can be used.

   The "proxy" column describes the operations a proxy may perform on a
   header field:

   *  a: A proxy can add or concatenate the header field if not present.

   *  r: A proxy must be able to read the header field, and thus this
      header field cannot be encrypted.

   *  d: A proxy can delete a header field value.

   The next six columns relate to the presence of a header field in a
   method:

   *  o: The header field is optional.

3. Backwards Compatibility

   The use of this extension in a network interface is a matter of local
   policy.  Different network interfaces may follow different policies,
   and consequently the use of this extension may be situational by
   nature.  UA and server implementations MUST be configurable to
   operate with or without this extension.





Arkko, et. al.              Standards Track                    [Page 11]


RFC 3329                 SIP Security Agreement             January 2003


   A server that is configured to use this mechanism, may also accept
   requests from clients that use TLS based on the rules defined in [5].
   Requests from clients that do not support this extension, and do not
   support TLS, can not be accepted.  This obviously breaks
   interoperability with some SIP clients.  Therefore, this extension
   should be used in environments where it is somehow ensured that every
   client implements this extension or is able to use TLS.  This
   extension may also be used in environments where insecure
   communication is not acceptable if the option of not being able to
   communicate is also accepted.

4. Examples

   The following examples illustrate the use of the mechanism defined
   above.

4.1 Client Initiated

   A UA negotiates the security mechanism to be used with its outbound
   proxy without knowing beforehand which mechanisms the proxy supports.
   The OPTIONS method can be used here to request the security
   capabilities of the proxy.  In this way, the security can be
   initiated even before the first INVITE is sent via the proxy.

             UAC                 Proxy               UAS
              |                    |                  |
              |----(1) OPTIONS---->|                  |
              |                    |                  |
              |<-----(2) 494-------|                  |
              |                    |                  |
              |<=======TLS========>|                  |
              |                    |                  |
              |----(3) INVITE----->|                  |
              |                    |----(4) INVITE--->|
              |                    |                  |
              |                    |<---(5) 200 OK----|
              |<---(6) 200 OK------|                  |
              |                    |                  |
              |------(7) ACK------>|                  |
              |                    |-----(8) ACK----->|
              |                    |                  |
              |                    |                  |
              |                    |                  |
              |                    |                  |

              Figure 2: Negotiation Initiated by the Client.





Arkko, et. al.              Standards Track                    [Page 12]


RFC 3329                 SIP Security Agreement             January 2003


   The UAC sends an OPTIONS request to its outbound proxy, indicating at
   the same time that it is able to negotiate security mechanisms and
   that it supports TLS and HTTP Digest (1).

   The outbound proxy responds to the UAC with its own list of security
   mechanisms - IPsec and TLS (2).  The only common security mechanism
   is TLS, so they establish a TLS connection between them.  When the
   connection is successfully established, the UAC sends an INVITE
   request over the TLS connection just established (3).  This INVITE
   contains the server's security list.  The server verifies it, and
   since it matches its static list, it processes the INVITE and
   forwards it to the next hop.

   If this example was run without Security-Server header in Step 2, the
   UAC would not know what kind of security the other one supports, and
   would be forced to error-prone trials.

   More seriously, if the Security-Verify was omitted in Step 3, the
   whole process would be prone for MitM attacks.  An attacker could
   spoof "ICMP Port Unreachable" message on the trials, or remove the
   stronger security option from the header in Step 1, therefore
   substantially reducing the security.

   (1) OPTIONS sip:proxy.example.com SIP/2.0
       Security-Client: tls
       Security-Client: digest
       Require: sec-agree
       Proxy-Require: sec-agree

   (2) SIP/2.0 494 Security Agreement Required
       Security-Server: ipsec-ike;q=0.1
       Security-Server: tls;q=0.2

   (3) INVITE sip:proxy.example.com SIP/2.0
       Security-Verify: ipsec-ike;q=0.1
       Security-Verify: tls;q=0.2
       Route: sip:callee@domain.com
       Require: sec-agree
       Proxy-Require: sec-agree

   The 200 OK response (6) for the INVITE and the ACK (7) are also sent
   over the TLS connection.  The ACK will contain the same Security-
   Verify header field as the INVITE (3).








Arkko, et. al.              Standards Track                    [Page 13]


RFC 3329                 SIP Security Agreement             January 2003


4.2 Server Initiated

   In this example of Figure 3 the client sends an INVITE towards the
   callee using an outbound proxy.  This INVITE does not contain any
   Require header field.

            UAC                 Proxy               UAS
             |                    |                  |
             |-----(1) INVITE---->|                  |
             |                    |                  |
             |<-----(2) 421-------|                  |
             |                    |                  |
             |------(3) ACK------>|                  |
             |                    |                  |
             |<=======IKE========>|                  |
             |                    |                  |
             |-----(4) INVITE---->|                  |
             |                    |----(5) INVITE--->|
             |                    |                  |
             |                    |<---(6) 200 OK----|
             |<----(7) 200 OK-----|                  |
             |                    |                  |
             |------(8) ACK------>|                  |
             |                    |-----(9) ACK----->|
             |                    |                  |
             |                    |                  |

             Figure 3: Server Initiated Security Negotiation.

   The proxy, following its local policy, does not accept the INVITE.
   It returns a 421 (Extension Required) with a Security-Server header
   field that lists IPsec-IKE and TLS.  Since the UAC supports IPsec-IKE
   it performs the key exchange and establishes a security association
   with the proxy.

   The second INVITE (4) and the ACK (8) contain a Security-Verify
   header field that mirrors the Security-Server header field received
   in the 421.  The INVITE (4), the 200 OK (7) and the ACK (8) are sent
   using the security association that has been established.

      (1) INVITE sip:uas.example.com SIP/2.0

      (2) SIP/2.0 421 Extension Required
          Security-Server: ipsec-ike;q=0.1
          Security-Server: tls;q=0.2






Arkko, et. al.              Standards Track                    [Page 14]


RFC 3329                 SIP Security Agreement             January 2003


      (4) INVITE sip:uas.example.com SIP/2.0
          Security-Verify: ipsec-ike;q=0.1
          Security-Verify: tls;q=0.2

5. Security Considerations

   This specification is about making it possible to select between
   various SIP security mechanisms in a secure manner.  In particular,
   the method presented herein allow current networks using, for
   instance, HTTP Digest, to be securely upgraded to, for instance,
   IPsec without requiring a simultaneous modification in all equipment.
   The method presented in this specification is secure only if the
   weakest proposed mechanism offers at least integrity and replay
   protection for the Security-Verify header field.

   The security implications of this are subtle, but do have a
   fundamental importance in building large networks that change over
   time.  Given that the hashes are produced also using algorithms
   agreed in the first unprotected messages, one could ask what the
   difference in security really is.  Assuming integrity protection is
   mandatory and only secure algorithms are used, we still need to
   prevent MitM attackers from modifying other parameters, such as
   whether encryption is provided or not.  Let us first assume two peers
   capable of using both strong and weak security.  If the initial
   offers are not protected in any way, any attacker can easily
   "downgrade" the offers by removing the strong options.  This would
   force the two peers to use weak security between them.  But if the
   offers are protected in some way -- such as by hashing, or repeating
   them later when the selected security is really on -- the situation
   is different.  It would not be sufficient for the attacker to modify
   a single message.  Instead, the attacker would have to modify both
   the offer message, as well as the message that contains the hash/
   repetition.  More importantly, the attacker would have to forge the
   weak security that is present in the second message, and would have
   to do so in real time between the sent offers and the later messages.
   Otherwise, the peers would notice that the hash is incorrect.  If the
   attacker is able to break the weak security, the security method
   and/or the algorithm should not be used.

   In conclusion, the security difference is making a trivial attack
   possible versus demanding the attacker to break algorithms.  An
   example of where this has a serious consequence is when a network is
   first deployed with integrity protection (such as HTTP Digest [4]),
   and then later new devices are added that support also encryption
   (such as TLS [3]).  In this situation, an insecure negotiation
   procedure allows attackers to trivially force even new devices to use
   only integrity protection.




Arkko, et. al.              Standards Track                    [Page 15]


RFC 3329                 SIP Security Agreement             January 2003


   Possible attacks against the security agreement include:

   1. Attackers could try to modify the server's list of security
      mechanisms in the first response.  This would be revealed to the
      server when the client returns the received list using the
      security.

   2. Attackers could also try to modify the repeated list in the second
      request from the client.  However, if the selected security
      mechanism uses encryption this may not be possible, and if it uses
      integrity protection any modifications will be detected by the
      server.

   3. Attackers could try to modify the client's list of security
      mechanisms in the first message.  The client selects the security
      mechanism based on its own knowledge of its own capabilities and
      the server's list, hence the client's choice would be unaffected
      by any such modification.  However, the server's choice could
      still be affected as described below:

      *  If the modification affected the server's choice, the server
         and client would end up choosing different security mechanisms
         in Step 3 or 4 of Figure 1.  Since they would be unable to
         communicate to each other, this would be detected as a
         potential attack.  The client would either retry or give up in
         this situation.

      *  If the modification did not affect the server's choice, there's
         no effect.

   4. Finally, attackers may also try to reply old security agreement
      messages.  Each security mechanism must provide replay protection.
      In particular, HTTP Digest implementations should carefully
      utilize existing reply protection options such as including a
      time-stamp to the nonce parameter, and using nonce counters [4].

   All clients that implement this specification MUST select HTTP
   Digest, TLS, IPsec, or any stronger method for the protection of the
   second request.












Arkko, et. al.              Standards Track                    [Page 16]


RFC 3329                 SIP Security Agreement             January 2003


6. IANA Considerations

   This specification defines a new mechanism-name namespace in Section
   2.2 which requires a central coordinating body.  The body responsible
   for this coordination is the Internet Assigned Numbers Authority
   (IANA).

   This document defines four mechanism-names to be initially
   registered, namely "digest", "tls", "ipsec-ike", and "ipsec-man".  In
   addition to these mechanism-names, "ipsec-3gpp" mechanism-name is
   also registered (see Appendix A).  Following the policies outlined in
   [10], further mechanism-names are allocated based on IETF Consensus.

   Registrations with the IANA MUST include the mechanism-name token
   being registered, and a pointer to a published RFC describing the
   details of the corresponding security mechanism.

6.1 Registration Information

   IANA registers new mechanism-names at
   http://www.iana.org/assignments/sip-parameters under "Security
   Mechanism Names".  As this document specifies five mechanism-names,
   the initial IANA registration for mechanism-names will contain the
   information shown in Table 2.  It also demonstrates the type of
   information maintained by the IANA.

      Mechanism Name                         Reference
      --------------                         ---------
      digest                                 [RFC3329]
      tls                                    [RFC3329]
      ipsec-ike                              [RFC3329]
      ipsec-man                              [RFC3329]
      ipsec-3gpp                             [RFC3329]

               Table 2: Initial IANA registration.

6.2 Registration Template

      To: ietf-sip-sec-agree-mechanism-name@iana.org
      Subject: Registration of a new SIP Security Agreement mechanism

      Mechanism Name:

         (Token value conforming to the syntax described in
         Section 2.2.)






Arkko, et. al.              Standards Track                    [Page 17]


RFC 3329                 SIP Security Agreement             January 2003


      Published Specification(s):

         (Descriptions of new SIP Security Agreement mechanisms
         require a published RFC.)

6.3 Header Field Names

   This specification registers three new header fields, namely
   Security-Client, Security-Server and Security-Verify.  These headers
   are defined by the following information, which has been included in
   the sub-registry for SIP headers under
   http://www.iana.org/assignments/sip-parameters.

      Header Name:    Security-Client
      Compact Form:   (none)

      Header Name:    Security-Server
      Compact Form:   (none)

      Header Name:    Security-Verify
      Compact Form:   (none)

6.4 Response Codes

   This specification registers a new response code, namely 494
   (Security Agreement Required).  The response code is defined by the
   following information, which has been included to the sub-registry
   for SIP methods and response-codes under
   http://www.iana.org/assignments/sip-parameters.

      Response Code Number:     494
      Default Reason Phrase:    Security Agreement Required

6.5 Option Tags

   This specification defines a new option tag, namely sec-agree.  The
   option tag is defined by the following information, which has been
   included in the sub-registry for option tags under
   http://www.iana.org/assignments/sip-parameters.












Arkko, et. al.              Standards Track                    [Page 18]


RFC 3329                 SIP Security Agreement             January 2003


   Name:         sec-agree
   Description:  This option tag indicates support for the Security
                 Agreement mechanism.  When used in the Require, or
                 Proxy-Require headers, it indicates that proxy servers
                 are required to use the Security Agreement mechanism.
                 When used in the Supported header, it indicates that
                 the User Agent Client supports the Security Agreement
                 mechanism.  When used in the Require header in the 494
                 (Security Agreement Required) or 421 (Extension
                 Required) responses, it indicates that the User Agent
                 Client must use the Security Agreement Mechanism.

7. Contributors

   Sanjoy Sen and Lee Valerius from Nortel Networks have contributed to
   the document.

8. Acknowledgements

   In addition to the contributors, the authors wish to thank Allison
   Mankin, Rolf Blom, James Undery, Jonathan Rosenberg, Hugh Shieh,
   Gunther Horn, Krister Boman, David Castellanos-Zamora, Miguel Garcia,
   Valtteri Niemi, Martin Euchner, Eric Rescorla and members of the 3GPP
   SA3 group for interesting discussions in this problem space.

9. Normative References

   [1]   Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A.,
         Peterson, J., Sparks, R., Handley, M. and E. Schooler, "SIP:
         Session Initiation Protocol", RFC 3261, June 2002.

   [2]   Kent, S. and R. Atkinson, "Security Architecture for the
         Internet Protocol", RFC 2401, November 1998.

   [3]   Dierks, T. and C. Allen, P. Kocher, "The TLS Protocol Version
         1.0", RFC 2246, January 1999.

   [4]   Franks, J., Hallam-Baker, P., Hostetler, J., Lawrence, S.,
         Leach, P., Luotonen, A. and L. Stewart, "HTTP Authentication:
         Basic and Digest Access Authentication", RFC 2617, June 1999.

   [5]   Rosenberg, J. and H. Schulzrinne, "Session Initiation Protocol
         (SIP): Locating SIP Servers", RFC 3263, June 2002.

   [6]   Kent, S. and R. Atkinson, "IP Authentication Header", RFC 2402,
         November 1998.





Arkko, et. al.              Standards Track                    [Page 19]


RFC 3329                 SIP Security Agreement             January 2003


   [7]   Kent, S. and R. Atkinson, "IP Encapsulating Security Payload
         (ESP)", RFC 2406, November 1998.

   [8]   Harkins, D. and D. Carrel, "The Internet Key Exchange (IKE)",
         RFC 2409, November 1998.

   [9]   Bradner, S., "Key words for use in RFCs to Indicate Requirement
         Levels", BCP 14, RFC 2119, March 1997.

   [10]  Narten, T. and H. Alvestrand, "Guidelines for Writing an IANA
         Considerations Section in RFCs", BCP 26, RFC 2434, October
         1998.

10. Informative References

   [11]  Garcia-Martin, M., "3rd-Generation Partnership Project (3GPP)
         Release 5 requirements on the  Session Initiation Protocol
         (SIP)", Work in Progress.

   [12]  3rd Generation Partnership Project, "Access security for IP-
         based services, Release 5", TS 33.203 v5.3.0, September 2002.

   [13]  Madson, C. and R. Glenn, "The Use of HMAC-MD5-96 within ESP and
         AH", RFC 2403, November 1998.

   [14]  Madson, C. and R. Glenn, "The Use of HMAC-SHA-1-96 within ESP
         and AH", RFC 2404, November 1998.

   [15]  Pereira, R. and R. Adams, "The ESP CBC-Mode Cipher Algorithms",
         RFC 2451, November 1998.





















Arkko, et. al.              Standards Track                    [Page 20]


RFC 3329                 SIP Security Agreement             January 2003


Appendix A. Syntax of ipsec-3gpp

   This appendix extends the security agreement framework described in
   this document with a new security mechanism: "ipsec-3gpp".  This
   security mechanism and its associated parameters are used in the 3GPP
   IP Multimedia Subsystem [12].  The Augmented BNF definitions below
   follow the syntax of SIP [1].

      mechanism-name   = ( "ipsec-3gpp" )
      mech-parameters    = ( algorithm / protocol /mode /
                             encrypt-algorithm / spi /
                             port1 / port2 )
      algorithm          = "alg" EQUAL ( "hmac-md5-96" /
                                         "hmac-sha-1-96" )
      protocol           = "prot" EQUAL ( "ah" / "esp" )
      mode               = "mod" EQUAL ( "trans" / "tun" )
      encrypt-algorithm  = "ealg" EQUAL ( "des-ede3-cbc" / "null" )
      spi                = "spi" EQUAL spivalue
      spivalue           = 10DIGIT; 0 to 4294967295
      port1              = "port1" EQUAL port
      port2              = "port2" EQUAL port
      port               = 1*DIGIT

   The parameters described by the BNF above have the following
   semantics:

      Algorithm
         This parameter defines the used authentication algorithm.  It
         may have a value of "hmac-md5-96" for HMAC-MD5-96 [13], or
         "hmac-sha-1-96" for HMAC-SHA-1-96 [14].  The algorithm
         parameter is mandatory.

      Protocol
         This parameter defines the IPsec protocol.  It may have a value
         of "ah" for AH [6], or "esp" for ESP [7].  If no Protocol
         parameter is present, the protocol will be ESP by default.

      Mode
         This parameter defines the mode in which the IPsec protocol is
         used.  It may have a value of "trans" for transport mode, or a
         value of "tun" for tunneling mode.  If no Mode parameter is
         present the IPsec protocol is used in transport mode.

      Encrypt-algorithm
         This parameter defines the used encryption algorithm.  It may
         have a value of "des-ede3-cbc" for 3DES [15], or "null" for no
         encryption.  If no Encrypt-algorithm parameter is present,
         encryption is not used.



Arkko, et. al.              Standards Track                    [Page 21]


RFC 3329                 SIP Security Agreement             January 2003


      Spi
         Defines the SPI number used for inbound messages.

      Port1
         Defines the destination port number for inbound messages that
         are protected.

      Port2
         Defines the source port number for outbound messages that are
         protected.  Port 2 is optional.

   The communicating SIP entities need to know beforehand which keys to
   use.  It is also assumed that the underlying IPsec implementation
   supports selectors that allow all transport protocols supported by
   SIP to be protected with a single SA.  The duration of security
   association is the same as in the expiration interval of the
   corresponding registration binding.


































Arkko, et. al.              Standards Track                    [Page 22]


RFC 3329                 SIP Security Agreement             January 2003


Authors' Addresses

   Jari Arkko
   Ericsson
   Jorvas, FIN  02420
   Finland

   Phone: +358 40 507 9256
   EMail: jari.arkko@ericsson.com

   Vesa Torvinen
   Ericsson
   Joukahaisenkatu 1
   Turku, FIN  20520
   Finland

   Phone: +358 40 723 0822
   EMail: vesa.torvinen@ericsson.fi

   Gonzalo Camarillo
   Advanced Signalling Research Lab.
   Ericsson
   FIN-02420 Jorvas
   Finland

   Phone: +358 40 702 3535
   EMail: Gonzalo.Camarillo@ericsson.com

   Aki Niemi
   NOKIA Corporation
   P.O.Box 321, FIN 00380
   Finland

   Phone: +358 50 389 1644
   EMail: aki.niemi@nokia.com

   Tao Haukka
   Nokia Corporation
   P.O. Box 50
   FIN - 90570 Oulu
   Finland

   Phone: +358 40 517 0079
   EMail: tao.haukka@nokia.com







Arkko, et. al.              Standards Track                    [Page 23]


RFC 3329                 SIP Security Agreement             January 2003


Full Copyright Statement

   Copyright (C) The Internet Society (2003).  All Rights Reserved.

   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works.  However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assigns.

   This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.



















Arkko, et. al.              Standards Track                    [Page 24]


Hosting by: Hurra Communications Ltd.
Generated: 2007-01-26 17:59:35