9. Glossary

9.1 Definitions

• SMP Symmetric Multi-Processors.
• UP Uni-Processor: system with one processor.
• APIC Advanced Programmable Interrupt Controler.
• thread A thread is a processor activity in a process. The same process can have multiple threads. Those threads share the process address space and can therefore share data.
• pthread Posix thread, threads defined by the Posix standard.
• process Program in execution, with its environment.
• MTRR Memory Type Range Register
• APM Advanced Power Management.
• FPU Floating Point Unit. Also called arithmetic co-processor.
• IRQ Interrupt ReQuest.
• EBDA Extended BIOS Data Area.
• ACPI Advanced Configuration and Power Interface.
• oops Internal kernel error.
• Cluster Group of computers that achieve a common computation (also known as Beowulf within the Linux community).

9.2 Concepts

• Data Races

  A data race happens when to processes want to modify a shared variable concurrently without protecting themselves from the effect of the other process.

  Let A a shared variable. Let P1 and P2 two processes that access this variable. Those two processes are making the same following operation: "read A in tmp variable (local to the precess); do tmp = tmp + 1 ; write tmp in A". If the A variable is not protected by a lock, resulting executions could not correspond to what is espected. For example, here is two examples if one do not lock A:

  case #1:
  A=0
  P1: read A -> tmp1 (so tmp1 is 0)
  P2: read A -> tmp2 (so tmp2 is 0)
  P1: tmp1 = tmp1 + 1 (so tmp1 is 1)
  P2: tmp2 = tmp2 + 1 (so tmp2 is 1)
  P1: tmp1 -> write A (so A is 1)
  P2: tmp2 -> write A (so A is 1)
  

  case #2:
  A=0
  P1: read A -> tmp1 (so tmp1 is 0)
  P1: tmp1 = tmp1 + 1 (so tmp1 is 1)
  P1: tmp1 -> write A (so A is 1)
  P2: read A -> tmp2 (so tmp2 is 1)
  P2: tmp2 = tmp2 + 1 (so tmp2 is 2)
  P2: tmp2 -> write A (so A is 2)
  

  To avoid this kind of problem, one uses a lock:

  A=0:
  P1: lock A
  P1: read A -> tmp1 (so tmp1 is 0)
  P2: lock A (so P2 is blocked)
  P1: tmp1 = tmp1 + 1 (so tmp1 is 1)
  P1: tmp1 -> write A (so A is 1)
  P1: unlock A (so P2 is unblocked)
  P2: read A -> tmp2 (so tmp2 is 1)
  P2: tmp2 = tmp2 + 1 (so tmp2 is 2)
  P2: tmp2 -> write A (so A is 2)
  P2: unlock A
  

• Deadlock

  This is an inter-blocking that occurs when two processes want to access at shared variables mutually locked. For example, let A and B two locks and P1 and P2 two processes:

  P1: lock A
  P2: lock B
  P1: lock B (so P1 is blocked by P2)
  P2: lock A (so P2 is blocked by P1)
  

  Process P1 is blocked because it is waiting for the unlocking of B variable by P2. However P2 also needs the A variable to finish its computation and free B. So we have a deadlock.

  In this example, the problem is very simple. But imagine what can happen in a 2 millions of lines of code (like the linux kernel) with hundreds of locks. :-)

Hosting by: Hurra Communications Ltd.
Generated: 2007-01-26 17:58:05