Next Previous Contents

1. PLIP for the impatient

This section is used to avoid reading the document when you need to install a plip connection in one minute. Skip it.

1.1 Source side

cat /proc/parport/0/hardware
insmod parport
insmod parport_pc io=0x378 irq=7 # Got those values in BIOS setup.
insmod plip
tail /var/log/messages
ifconfig plip0 pointopoint \
         netmask up
ifconfig plip0
ping -c1
route -n

1.2 Target side

ifconfig plip1  pointopoint \
         netmask up
route add -host dev plip1 # if the route is not present

1.3 Final tests

ping # from
ping # from

Now all TCP/IP is available between the two computer via the parallel port. Have a nice trip !

Next Previous Contents

Hosting by: Hurra Communications Ltd.
Generated: 2007-01-26 17:58:04