 |
|
1. Introduction
Share this with all; sell it to no one.
First, I just want to thank all the Linux programmers out there. Your contributions have made a difference. I hope this small contribution is useful to the Linux users out there.
I wrote this as a beginning for using Portslave with the Linux router project. It seems that Portslave is a widely used program with no documentation. Since I just dove into using Portslave I am sure this document can be improved by others over time. After several days of fighting Portslave I figured out how incredibly easy to use it really is.
The trouble I ran into most of the time was PAP Authentication failure. This was really tough thing to work out (I thought). I also had a few other errors, but if you follow this How To it should at least get you started (or start you to the insane asylum).
1.1. Copyright Information
This document is copyrighted (c) 2000 Tom McKellips and is distributed under the terms of the Linux Documentation Project (LDP) license, stated below.
Unless otherwise stated, Linux HOWTO documents are copyrighted by their respective authors. Linux HOWTO documents may be reproduced and distributed in whole or in part, in any medium physical or electronic, as long as this copyright notice is retained on all copies. Commercial redistribution is allowed and encouraged; however, the author would like to be notified of any such distributions.
All translations, derivative works, or aggregate works incorporating any Linux HOWTO documents must be covered under this copyright notice. That is, you may not produce a derivative work from a HOWTO and impose additional restrictions on its distribution. Exceptions to these rules may be granted under certain conditions; please contact the Linux HOWTO coordinator at the address given below.
In short, we wish to promote dissemination of this information through as many channels as possible. However, we do wish to retain copyright on the HOWTO documents, and would like to be notified of any plans to redistribute the HOWTOs.
If you have any questions, please contact <linux-howto@metalab.unc.edu>
1.2. Disclaimer
No liability for the contents of this documents can be accepted. Use the concepts, examples and other content at your own risk. As this is a new edition of this document, there may be errors and inaccuracies, that may of course be damaging to your system. Proceed with caution, and although this is highly unlikely, the author does not take any responsibility for that.
All copyrights are held by their respective owners, unless specifically noted otherwise. Use of a term in this document should not be regarded as affecting the validity of any trademark or service mark.
Naming of particular products or brands should not be seen as endorsements.
You are strongly recommended to take a backup of your system before major installation and backups at regular intervals.
Hosting by: Hurra Communications Ltd.
Generated: 2007-01-26 17:58:23