Then, there are cameras supporting the
so-called USB Mass Storage protocol. This is a protocol that has been published
and lets you access any storage device, be it a camera or a disk connected via
USB to your computer. As there are already drivers for this protocol out there,
you don't need an additional program like gphoto2.
As of now, the following cameras seem to support the USB Mass Storage protocol:
Casio QV [2x00,3x00,8000]
Fuji FinePix S1 Pro, [1400,2400,4700]Zoom, 1300, 4500
HP PhotoSmart 315, 618, 912
Leica Digilux 4.3
Konica KD300Z
Kyocera Finecam s3
Minolta Dimage 7
Nikon Coolpix 995
Olympus C-100, C-200Z, C-700, C-860L, C-2040, C-3020Z, C-3040Z, C-4040Zoom, D-510, E-10
Pentax Optio 330
Sony DSC-F505(V), DSC P5, DSC-F707
Again, those cameras cannot be accessed through gphoto2.
Other cameras support a protocol called PTP or USB Imaging Devices that has
been developed by Kodak and other. gphoto2 does not support PTP yet, but jPhoto does. Here is a short list of cameras that use this protocol:
Kodak DC-4800, DX-3215, DX-3500, DX-3600, DX-3700, DX-3900,
MC3 and all the cameras that use Kodak Easy Share™ system.
Sony DSC-P5, DSC-F707 (both need user configuration of the camera)
These cameras won't be supported until gphoto2 implements PTP.