|
With no further changes your client should boot on the CLIENT pc, it just happens to be sharing it's files via NFS
At this point you have a console terminal. you need to make just a few more changes to run X
As root on client run Xconfigurator and mouseconfig,
If this fails use XF86Setup check your RPMS dir on your CD (eg.ls *Setup*)
#chech how xfs starts on server /etc/rc.d/init.d/xfs start) echo -n "Starting X Font Server: " rm -fr /tmp/.font-unix daemon --check xfs su xfs -c xfs -s /bin/sh touch /var/lock/subsys/xfs echo ;; #edit XF86Config for all machines FontPath "tcp/snoball:7100"
You are now set up for a console login to the client PC. You are using the client memory and processor, this is adequate for console programs and there and many or great merit, program in python, email with pine or browse with lynx.
You may still start X from here, make the server changes in the next
section, at the prompt type X -query snoball
and you will get the
login box to the server
Server set up
1. Make sure the client is matched by a clause in /etc/X11/xdm/Xaccess * CHOOSER BROADCAST #any indirect host can get a chooser 2. Comment out the :0 in /etc/X11/xdm/Xservers #:0 local /usr/X11R6/bin/X 3. Then make sure that xdm is run from the init scripts. #etc/inittab id:5:initdefault: and # Run xdm in runlevel 5 # xdm is now a separate service x:5:respawn:/etc/X11/prefdm -nodaemon xdm:5:respawn:/usr/X11R6/bin/xdm -nodaemon
On the client
Get the slow PC's to run on the server, Fast PC's (eg 166mhz 32mb ram)can run ok on their own CPU and memory
the part maarked WARNING dosn't actually work as yet, but I'm close to getting the syntax correct, use the two stage method via the console login in the mean time.
#/tftpboot/elite/etc/inittab id:5:initdefault: #WARNING x:5:respawn:/usr/X11R6/bin/Xwrapper -query snoball #WARNING OR to run on client ?? id:3:initdefault: #runlevel 3 ie console x:5:respawn:/etc/X11/prefdm -nodaemon
Hosting by: Hurra Communications Ltd.
Generated: 2007-01-26 17:58:36