 |
|
Plug-and-Play-HOWTO
David S.Lawyer
mailto:dave@lafn.org
v1.13, July 2005
Explains resources used in Plug-and-Play (PnP) such as addresses, interrupts, etc. Covers both the PCI bus (inherently PnP) and PnP on the old ISA bus. If PnP did it's job right, you wouldn't need this howto. Otherwise, this will both explain PnP and help you detect and assign resources to hardware (low level configuring). It doesn't cover what's called "Universal Plug and Play" (UPnP).
1. Introduction
- 1.1 1. Copyright, Trademarks, Disclaimer, & Credits
- 1.2 Future Plans; You Can Help
- 1.3 New Versions of this HOWTO
- 1.4 New in Recent Versions
- 1.5 General Introduction. Do you need this HOWTO?
2. What PnP Should Do: Allocate "Bus-Resources"
- 2.1 What is Plug-and-Play (PnP)?
- 2.2 Hardware Devices and Communication with them
- 2.3 Addresses
- 2.4 I/O Addresses (principles relevant to other resources too)
- 2.5 Memory Ranges
- 2.6 IRQs --Overview
- 2.7 DMA (Direct Memory Access) or Bus Mastering
- 2.8 DMA Channels (not for PCI bus)
- 2.9 "Resources" for both Device and Driver
- 2.10 Resources are Limited
- 2.11 Second Introduction to PnP
- 2.12 How Pnp Works (simplified)
- 2.13 Starting Up the PC
- 2.14 Buses
- 2.15 How Linux Does PnP
- 2.16 Problems with Linux PnP
3. Setting up a PnP BIOS
- 3.1 Do you have a PnP operating system?
- 3.2 Assigning Resources by the BIOS
- 3.3 Reset the configuration?
4. How to Deal with PnP Cards
- 4.1 Introduction to Dealing with PnP Devices
- 4.2 Device Driver Configures, Reserving Resources
- 4.3 /sys User Interface Configures
- 4.4 BIOS Configures
- 4.5 ISA cards only: Disable PnP ?
- 4.6 ISA Bus: Isapnp (part of isapnptools)
- 4.7 PCI Utilities
- 4.8 Windows Configures
- 4.9 PnP Software/Documents
5. Tell the Driver the Configuration ??
6. How Do I Find Devices and How Are They Configured?
- 6.1 Finding and How-Configured Are Related
- 6.2 Devices May Have Two "Configurations"
- 6.3 Finding Hardware
- 6.4 Boot-time Messages
- 6.5 The /proc Directory Tree
- 6.6 The /sys Directory Tree
- 6.7 PCI Bus Inspection
- 6.8 ISA Bus Introduction
- 6.9 ISA PnP cards
- 6.10 LPC Bus
- 6.11 Non-PnP Cards
- 6.12 Non-PnP Cards with jumpers
- 6.13 Neither PnP nor jumpers
- 6.14 Tools for Detecting and/or Configuring all Hardware
- 6.15 Tool for Detecting and Configuring One Type of Hardware
- 6.16 Use MS Windows
7. PnP for External and Plug-in Devices
8. Error Messages
- 8.1 Unexpected Interrupt
- 8.2 Plug and Play Configuration Error (Dell BIOS)
- 8.3 isapnp: Write Data Register 0xa79 already used (from logs)
- 8.4 Can't allocate region (PCI)
9. Interrupt Conflicts
10. Appendix
- 10.1 Universal Plug and Play (UPnP)
- 10.2 Address Details
- 10.3 ISA Bus Configuration Addresses (Read-Port etc.)
- 10.4 Interrupts --Details
- 10.5 PCI Interrupts
- 10.6 ISA Isolation
- 10.7 Bus Mastering and DMA resources
- 10.8 Historical and Obsolete
Next Previous Contents
Hosting by: Hurra Communications Ltd.
Generated: 2007-01-26 17:58:34