Hence the NeoMagic chipset series NM20xx is one of the most used graphic chips in laptops in our times, I will spent a few words on them. Though a long time this chip was only supported by commercial X servers, since the middle of 1998 RedHat provided a binary X server manufactured by PrecisionInsight. Since version 3.3.3 this X server is also available by XFree86.
This chapter is a courtesy of Cedric Adjih < email@example.com >. I changed some minor parts.
An apparently little known fact about the Neomagic chipset NM20xx is that you can run text mode in 100x37 (i.e. 800x600). This text mode is very nice (as opposed to the 80x25 which is ugly). I tried this with a HP OmniBook 800 and suppose it might work with other laptops using the NeoMagic chip, too. The following that I wrote was much longer than I expected so I wrote it as a kind of mini-howto :-) :
The main problem is that is a bit difficult to set up, and if you're going wrong with SVGATextMode/restoretextmode some results on the LCD might be frightening. Although I didn't manage to break my LCD with many many attempts going wrong, DISCLAMER: THIS MIGHT DAMAGE YOUR HARDWARE. YOU HAVE BEEN WARNED. FOLLOW THE FOLLOWING INSTRUCTIONS AT YOUR OWN RISKS. I'M NOT RESPONSIBLE IF SOMETHING BAD HAPPENS.
You need to do three main steps:
restoretextmodewith correct register data.
All the files I have modified, are available for now at http://starship.python.net/crew/adjih/data/cda-omni-trick.tar.gz
Recent kernels (2.2.x) need to be compiled with CONFIG_VIDEO_GFX_HACK defined. Default is off. (look in /usr/src/linux-2.2.x/arch/i386/boot/video.S)
This is done by passing the parameter
vga=770 to older kernels or
vga=7 to 2.2.x kernels. Example with lilo.conf:
image=/boot/bzImage-modif label=22 append="svgatextmode=100x37x8_SVGA" #explained later vga=7 read-only
SVGATextModeat Boot Time
You must arrange to run
restoretextmode <name of some textreg.dat file> and
SVGATextMode 100x37x8_SVGA at boot time.
An example textreg.dat for restoretextmode (obtained using
savetextmode) is in my tar archive in tmp/, and an example /etc/TextConfig.
Since I'm lazy, I've simply put
restoretextmode in the /etc/rc.boot/kbd file from my Debian/GNU Linux which get executed at boot time (also available in the tar archive).
Annoying things will be displayed if you don't use the right SVGATextMode in the right video text mode: this is why I also pass the environmental variable
"svgatextmode=100x37x8_SVGA" (arbitrary name) to the kernel (using append=xxx in lilo.conf) when I also set
vga=7: the script /etc/rc.boot/kbd tests this variable and calls
SVGATextMode IF AND ONLY IF.
vga=7(lilo.conf), you should see white background at some point, but the characters will be black on black. This is ok. You'll have to reboot blindly now.
Hosting by: Hurra Communications Ltd.
Generated: 2007-01-26 17:58:32